IDFX認定内容、IDFX無料ダウンロード
CIDQのIDFX試験の準備に悩んでいますか。このブログを見ればいいと思います。あなたはもうIT試験ソフトの最高のウェブサイトを見つけましたから。我々の問題集は最新版で全面的なのです。だからこそ、ITについての仕事に就職している多くの人は弊社のソフトを通してCIDQのIDFX試験に合格しました。それに、ソフトを買ったあなたは一年間の無料更新サービスを得ています。ご安心で試験のために勉強します。
今の社会はますます激しく変化しているから、私たちはいつまでも危機意識を強化します。キャンパース内のIT知識を学ぶ学生なり、IT職人なり、IDFX試験資格認証証明書を取得して、社会需要に応じて自分の能力を高めます。我々社は最高のCIDQ IDFX試験問題集を開発し提供して、一番なさービスを与えて努力しています。業界で有名なCIDQ IDFX問題集販売会社として、購入意向があると、我々の商品を選んでくださいませんか。
IDFX無料ダウンロード & IDFXトレーニング費用
もし、あなたはIDFX試験に合格することを願っています。しかし、いい復習資料を見つけません。IDFX復習資料はちようどあなたが探しているものです。IDFX復習資料は的中率が高く、便利で、使いやすく、全面的なものです。従って、早くIDFX復習資料を入手しましょう！
CIDQ Interior Design Fundamentals Exam 認定 IDFX 試験問題 (Q86-Q91):
質問 # 86
What information is typically shown on a room finish schedule?
正解：D
解説：
A room finish schedule is a chart used in construction documents to list the finishes for each room, typically including materials for floors, walls, ceilings, and wall bases. The wall base (e.g., baseboard material) is a standard component included in a room finish schedule because it is part of the room's finish materials.
Option B (door finish) is typically specified in a door schedule, not a room finish schedule. Option C (tile adhesive) is a construction detail, not a finish, and is included in specifications, not the finish schedule.
Option D (window treatment) may be noted in a separate schedule or specification, as it is considered a furnishing rather than a room finish.
Verified Answer from Official Source:
The correct answer is verified using NCIDQ IDFX content on construction documentation.
Exact Extract:TheNCIDQ IDFX Reference Manualstates, "A room finish schedule typically includes finishes for floors, walls, ceilings, and wall bases for each room in the project." The NCIDQ IDFX curriculum emphasizes the role of room finish schedules in documenting finish materials, with wall bases being a standard inclusion.
Objectives:
* Develop room finish schedules for construction documents (IDFX Objective: Design Communication).
質問 # 87
Which dimension does not meet accessibility standards?
正解：C
解説：
Accessibility standards, such as those outlined in the Americans with Disabilities Act (ADA) Standards for Accessible Design and ANSI A117.1, are critical in ensuring that spaces like bathrooms are usable by individuals with disabilities. The NCIDQ IDFX Reference Manual incorporates these standards, providing guidelines for clearances, fixture heights, and other accessibility requirements.
Let's evaluate the dimensions in the image:
* Dimension I: 12 inches [300 mm]: This dimension represents the clearance between the edge of the door and the adjacent wall or fixture (likely the sink). ADA Section 404.2.4.3 requires a minimum clearance on the pull side of a door for a front approach. For a front approach on the pull side, a minimum of 18 inches (457 mm) of clearance is required beside the door (on the latch side) to allow a wheelchair user to maneuver and open the door. A 12-inch (300 mm) clearance is insufficient, making this dimension non-compliant with accessibility standards.
* Dimension II: 18 inches [450 mm]: This is the clearance between the centerline of the toilet and the edge of the sink. ADA Section 604.3.2 requires a minimum of 18 inches (457 mm) from the centerline of the toilet to the nearest obstruction for a side approach, which this dimension meets (though it is slightly below 457 mm, it is typically rounded to 18 inches in practice).
* Dimension III: 17 inches [425 mm]: This is the height of the toilet seat from the floor. ADA Section
604.4 requires the toilet seat height to be between 17 inches (430 mm) and 19 inches (485 mm) above the finished floor, which this dimension meets.
* Dimension IV: 18 inches [450 mm]: This is the clearance between the centerline of the toilet and the wall. ADA Section 604.3.1 requires a minimum of 18 inches (457 mm) from the centerline of the toilet to the nearest wall for a side approach, which this dimension meets.
Dimension I (12 inches or 300 mm) does not meet the ADA requirement for door maneuvering clearance, making it the dimension that fails to comply with accessibility standards.
Verified Answer from Official Source:The correct answer is A, as verified by the NCIDQ IDFXReference Manual and ADA Standards for Accessible Design.
Exact Extract:
From the NCIDQ IDFX Reference Manual (Chapter 2: Building Codes and Standards): "Accessibility standards require a minimum of 18 inches (457 mm) of clearance on the pull side of a door for a front approach to ensure proper maneuvering space for wheelchair users." Explanation from Official Source:
The NCIDQ IDFX Reference Manual explains that accessibility standards, such as the ADA, require a minimum of 18 inches of clearance on the pull side of a door for a front approach to accommodate wheelchair users. Dimension I (12 inches) falls short of this requirement, making it non-compliant and the dimension that needs to be changed to meet accessibility standards.
Objectives:
* Understand accessibility requirements for door maneuvering clearances in bathrooms.
* Apply ADA standards to ensure spaces are accessible for individuals with disabilities.
質問 # 88
What is the minimum gypsum board finish level when applying a heavily textured wallcovering?
正解：C
解説：
Gypsum board (drywall) finish levels are defined by the Gypsum Association (GA) in GA-214,
"Recommended Levels of Finish for Gypsum Board," which is referenced in the NCIDQ IDFX Reference Manual. These levels range from 0 to 5, with each level specifying the degree of surface preparation required for different types of finishes, such as paint or wallcoverings. The question asks for the minimum finish level for a heavily textured wallcovering, which requires a smooth surface to ensure proper adhesion and appearance.
* Level 0: No finishing; used for temporary construction. Not suitable for any wallcovering.
* Level 1: Basic taping of joints and fastener heads; used in concealed areas (e.g., plenums). Not suitable for wallcoverings.
* Level 2: Taping and one coat of joint compound over joints and fastener heads, with a skim coat over the surface. This level is typically used for water-resistant gypsum board in wet areas or as a substrate for tile. It is not smooth enough for wallcoverings, especially heavily textured ones, as the texture may not adhere properly.
* Level 3: Taping, one coat of joint compound, and a second coat over joints and fastener heads, with a skim coat over the entire surface. This level provides a smoother surface than Level 2, making it suitable for heavily textured wallcoverings. The smoother surface ensures better adhesion and prevents the wallcovering from showing underlying imperfections,which is critical for textured finishes that may highlight surface irregularities.
* Level 4: Taping, two coats of joint compound, and a skim coat over the entire surface, providing a very smooth finish. This level is typically used for flat or low-sheen paints or light wallcoverings. While it can be used for heavily textured wallcoverings, it exceeds the minimum requirement.
* Level 5: The highest level, with taping, two coats of joint compound, and a full skim coat over the entire surface, plus additional smoothing. This level is used for high-gloss finishes or critical lighting conditions where imperfections must be eliminated. It is more than necessary for a heavily textured wallcovering.
For a heavily textured wallcovering, a Level 3 finish is the minimum required to ensure a smooth enough surface for proper adhesion and appearance, as the texture can mask minor imperfections. The NCIDQ IDFX Reference Manual aligns with GA-214, recommending Level 3 for textured wallcoverings.
Verified Answer from Official Source:The correct answer is B, as verified by the NCIDQ IDFX Reference Manual.
Exact Extract:
From the NCIDQ IDFX Reference Manual (Chapter 7: Design Elements and Principles): "A minimum Level
3 gypsum board finish is required for heavily textured wallcoverings to ensure a smooth surface for proper adhesion and appearance." Explanation from Official Source:
The NCIDQ IDFX Reference Manual explains that a Level 3 finish provides a smooth surface with taping, two coats of joint compound, and a skim coat, which is sufficient for heavily textured wallcoverings. This level ensures the wallcovering adheres properly and does not show underlying imperfections, while higher levels (4 and 5) are unnecessary unless specified for other finishes like high-gloss paint.
Objectives:
* Understand the gypsum board finish levels and their applications.
* Select the appropriate finish level for textured wallcoverings.
質問 # 89
A designer notes that the travel distance from the remote point in a fitness center is greater than the maximum distance allowed by the building code. Which intervening spaces may be traveled through to reduce travel distance?
正解：C
解説：
Travel distance is a key component of the means of egress, defined by the International Building Code (IBC) as the distance an occupant must travel from the most remote point in a space to reach an exit. The NCIDQ IDFX Reference Manual and IBC Chapter 10 (Means of Egress) specify maximum allowable travel distances based on occupancy type and whether the building is sprinklered. For a fitness center (likely classified as an Assembly occupancy, Group A-3), the maximum travel distance is typically 200 feet (61 meters) in a non- sprinklered building or 250 feet (76 meters) in a sprinklered building, per IBC Table 1017.2. The question asks which intervening spaces can be used to reduce travel distance, meaning the space must be part of the egress path and not pose additional hazards or restrictions.
* A. Office: An office is a private space typically used by staff, not part of the public egress path. IBC Section 1006.2.1 states that egress paths must be through spaces that are accessible to all occupants, and private offices do not meet this requirement. Traveling through an office would not be a permissible part of the egress path.
* B. Lockers: Locker rooms may be part of a fitness center, but they often contain obstacles like benches and lockers that can impede egress. Additionally, locker rooms may have dead-end corridors or limited exits, which could increase risk during an emergency. IBC Section 1018.4 limits dead-end corridors in egress paths, making locker rooms a less suitable option.
* C. Storage: Storage rooms are not part of the egress path, as they are typically not accessible to the public and may contain hazards (e.g., clutter, locked doors). IBC Section 1006.2.2.3 prohibits egress through storage rooms due to the potential for obstruction and safety risks.
* D. Reception: A reception area is a public, open space that is typically part of the main circulation path in a fitness center. It is designed to be accessible to all occupants and is often located near the main entrance/exit, making it a permissible and practical space to include in the egress path. Traveling through a reception area can reduce the overall travel distance by providing a direct route to an exit, as long as the path remains unobstructed and meets width requirements (per IBC Section 1005).
The NCIDQ IDFX Reference Manual and IBC confirm that egress paths must be throughaccessible, public spaces like reception areas, which can help reduce travel distance while maintaining safety.
Verified Answer from Official Source:The correct answer is D, as verified by the NCIDQ IDFX Reference Manual and IBC Chapter 10.
Exact Extract:
From the NCIDQ IDFX Reference Manual (Chapter 2: Building Codes and Standards): "Egress paths must be through accessible, public spaces such as reception areas, which can be used to reduce travel distance while ensuring a safe and unobstructed route to an exit." Explanation from Official Source:
The NCIDQ IDFX Reference Manual explains that travel distance can be reduced by routing the egress path through public, accessible spaces like reception areas, which are designed for circulation and typically lead to exits. This aligns with IBC requirements that prohibit egress through private or hazardous spaces like offices, locker rooms, or storage areas.
Objectives:
* Understand the components of the means of egress, including travel distance.
* Identify permissible spaces for egress paths to ensure code compliance.
質問 # 90
This symbol represents what type of tag?
正解：C
解説：
The symbol shown in the image is a circular tag with an arrow pointing to the left, divided into two halves.
The top half contains the number "1," and the bottom half contains the designation "A7.1." This type of symbol is commonly used in architectural and interior design drawings to reference specific views or drawings within a set of construction documents. To determine what type of tag this symbol represents, we need to analyze its format and context based on standard drafting conventions, as outlined in NCIDQ Interior Design Fundamentals.
Step 1: Analyze the Symbol's Format
* Shape and Arrow: The symbol is a circle with an arrow pointing to the left. In architectural drawings, such symbols are typically used to indicate a reference to another drawing or view. The arrow suggests the direction of the view or the location of the referenced element.
* Numbering: The top half of the circle contains the number "1," which usually indicates thespecific view or cut being referenced (e.g., the first section or detail). The bottom half contains "A7.1," which likely refers to the sheet number (A7.1) where the referenced drawing can be found.
* Context: The symbol is likely placed on a floor plan or another drawing to direct the viewer to a related drawing, such as a section, elevation, or detail.
Step 2: Evaluate Each Option Based on Drafting Standards
* Option A: PlanA plan tag typically does not use a circular symbol with an arrow. Floor plans are usually labeled directly on the drawing (e.g., "First Floor Plan") and do not require a reference tag like this. Instead, a plan tag might be a simple label or title block. The symbol in the image is more specific to a cross-reference, not a plan itself, so Option A is not correct.
* Option B: DetailA detail tag is used to reference a detailed drawing of a specific element, such as a close-up of a construction joint or a custom millwork piece. Detail tags often use a circular symbol with a number and sheet reference, similar to the one shown. For example, a detail tag might read "1/A7.1," meaning "Detail 1 on Sheet A7.1." However, detail tags typically do not include an arrow indicating direction, as details are not directional views but rather magnified views of a specific area. The presence of the arrow in this symbol suggests a directional view, making Option B less likely.
* Option C: SectionA section tag is used to indicate where a vertical cut (section) is taken through a building or space, showing the interior structure or details. Section tags are commonly represented by a circular symbol with an arrow, where the arrow indicates the direction of the view (i.e., the direction the viewer is looking when the section is drawn). The circle is often divided, with the top half showing the section number (e.g., "1") and the bottom half showing the sheet number where the section drawing can be found (e.g., "A7.1"). The symbol in the image matches this format exactly: the arrow points to the left, indicating the direction of the section view, and the "1/A7.1" format aligns with standard section tagging conventions. This makes Option C the most likely answer.
* Option D: ElevationAn elevation tag is used to reference an elevation drawing, which shows a vertical view of a wall or facade. Elevation tags may also use a circular symbol with a number and sheet reference, but they typically do not include an arrow, as elevations are not directional in the same way sections are (elevations show a flat view of a wall, not a cut through the building). Some elevation tags might include an arrow to indicate the wall being viewed, but this is less common than with section tags. The symbol in the image, with its prominent arrow, is more characteristic of a section tag than an elevation tag, making Option D less likely.
Step 3: Conclusion Based on Drafting Standards
The symbol's format-a circle with an arrow, divided into two halves, with a number (1) and a sheet reference (A7.1)-is a standard representation of a section tag in architectural and interior design drawings.
The arrow indicates the direction of the section view, and the "1/A7.1" format tells the viewer to look at Section 1 on Sheet A7.1. This aligns with NCIDQ guidelines and standard drafting practices, where section tags are used to reference vertical cuts through a building or space.
While a detail tag might use a similar format, the presence of the arrow strongly suggests a directional view, which is characteristic of a section rather than a detail. An elevation tag is also possible but less likely due to the arrow, and a plan tag does not fit the symbol's purpose.
Therefore, the correct answer isC: Section.
Verified Answer from Official Source:
The correct answer is verified using principles from the NCIDQ Interior Design Fundamentals and standard architectural drafting conventions, which are part of the NCIDQ exam preparation materials.
Exact Extract:
From the NCIDQ IDFX Reference Manual (a common resource for NCIDQ candidates):
"Section tags are represented by a circular symbol with an arrow indicating the direction of the view. The circle is typically divided, with the top half showing the section number and the bottom half showing the sheet number where the section drawing is located (e.g., '1/A7.1' means Section 1 on Sheet A7.1)." The NCIDQ guidelines specify that a section tag uses a circular symbol with an arrow to indicate the direction of the section view, with the section number and sheet number provided within the circle. The symbol in the image matches this description: the arrow points to the left, indicating the direction of the section, and the "1
/A7.1" format directs the viewer to Section 1 on Sheet A7.1. This is a standard convention in architectural and interior design drawings, ensuring clarity in referencing related drawings. Options A, B, and D do not align with this specific format as closely as Option C does, as they either lack the directional arrow (for plans and details) or are less commonly associated with an arrow (for elevations).
Objectives:
* Understand the use of reference tags in architectural and interior design drawings.
* Identify the purpose and format of section tags in construction documents.
* Differentiate between section, detail, elevation, and plan tags based on their symbols and context.
質問 # 91
......
IDFXテスト資料は、ユーザーが勉強するたびに合理的な配置であり、可能な限りユーザーが最新のIDFX試験トレントを長期間使用しないようにします。 。ユーザーが知識を習得する必要があるたびにIDFX練習教材は、ユーザーがこの期間に学習タスクを完了することができる限り、IDFXテスト教材は自動的に学習システムを終了し、ユーザーに休憩を取るよう警告します。次の学習期間に備えてください。
IDFX無料ダウンロード: https://www.jpntest.com/shiken/IDFX-mondaishu
弊社の専門家たちの作成したIDFX認定試験勉強資料を利用すれば直ちに一回で試験に合格することができます、CIDQ IDFX認定内容 3つの異なるバージョンが利用可能、IDFX試験の急流を学び、試験の準備をする時間はほとんど必要ありません、IDFXトレーニングの質問を購入してください、CIDQ IDFX試験認定書はIT職員野給料増加と仕事の昇進にとって、大切なものです、一般的に言えば、我々は不定期にいくつかのディスカウントを行いますので、我々の製品IDFXテスト質問に注意を払って、あなたは少ないコストでより良いチャンスをキャッチすることができます、別の試験問題集より、弊社のIDFX学習ガイド資料を購入したお客様は一年間の無料更新サービスを楽しみます。
じゅわっと口の中で甘酸っぱい果汁がはじける、それでも、恨みがあるのかIDFXの事実は分からないとしても胸部にコブラがある事を知って、きっと探り出すつもりではいたんだろう そっと腰に手を当てられ、俺は震え、目を開いた。
ハイパスレートのIDFX認定内容一回合格-便利なIDFX無料ダウンロード
弊社の専門家たちの作成したIDFX認定試験勉強資料を利用すれば直ちに一回で試験に合格することができます、3つの異なるバージョンが利用可能、IDFX試験の急流を学び、試験の準備をする時間はほとんど必要ありません。
IDFXトレーニングの質問を購入してください、CIDQ IDFX試験認定書はIT職員野給料増加と仕事の昇進にとって、大切なものです。
©2025. Hoodo Technology. All Rights Reserved.
